The Red Gundam from the movie "Mobile Suit Gundam GQuuuuuuX -Beginning-" is joining the "Metal Robot Spirits" action-figure lineup from Bandai! The Red Gundam's unique appearance was designed by Ikuto Yamashita. This luxurious figure comes with a wide variety of equipment, such as a beam rifle, beam saber, Gundam shield, hammer, and bits! A wide range of motion in its joints allows for flexible posing; die-cast parts are used abundantly around the hip joints to increase their strength. The shoulder mechanism also uses die-cast parts, so they can get into flexible poses such as holding the Beam Saber in both hands. The Red Gundam carries a Beam Rifle in its right hand and a Beam Saber in its left hand; the painstaking level of detail on this figure even extends to the soles of its feet, which are engraved with the model number! The two Beam Sabers on its backpack can each be attached with a clear pink blade part. A large hammer is also included with metal chain parts for a heavy texture. The Red Gundam's main weapon, the Bit, can be mounted on its shoulder; the Gundam Shield can be held in the hands, or it can be attached to the elbow. The Gundam Shield can also be attached to the backpack. The Beam Rifle's sub-grip and sensor unit are movable, and can be attached to the rear waist. Two Bits are included -- these voluminous weapons are about 10cm long each. In addition to attaching them to the shoulders of the Red Gundam, they can also be displayed in their ejected state using the dedicated base and auxiliary support.
- [Figure Size]: Approximately 15.5cm tall
- [Materials]: ABS, die-cast, PVC
[Set Contents]:
- Main figure
- Interchangeable hands (x3 each, left and right)
- Beam rifle
- Gundam shield
- Mounting parts for Gundam shield
- Replacement Gundam shield grip parts
- Beam saber blades (x2)
- Bits (x2)
- Hammer
- Joint parts for hammer
- Joint parts for hard points (x4)
- Auxiliary supports (x2)
- Base set
The Red Gundam from the movie "Mobile Suit Gundam GQuuuuuuX -Beginning-" is joining the "Metal Robot Spirits" action-figure lineup from Bandai! The Red Gundam's unique appearance was designed by Ikuto Yamashita. This luxurious figure comes with a wide variety of equipment, such as a beam rifle, beam saber, Gundam shield, hammer, and bits! A wide range of motion in its joints allows for flexible posing; die-cast parts are used abundantly around the hip joints to increase their strength. The shoulder mechanism also uses die-cast parts, so they can get into flexible poses such as holding the Beam Saber in both hands. The Red Gundam carries a Beam Rifle in its right hand and a Beam Saber in its left hand; the painstaking level of detail on this figure even extends to the soles of its feet, which are engraved with the model number! The two Beam Sabers on its backpack can each be attached with a clear pink blade part. A large hammer is also included with metal chain parts for a heavy texture. The Red Gundam's main weapon, the Bit, can be mounted on its shoulder; the Gundam Shield can be held in the hands, or it can be attached to the elbow. The Gundam Shield can also be attached to the backpack. The Beam Rifle's sub-grip and sensor unit are movable, and can be attached to the rear waist. Two Bits are included -- these voluminous weapons are about 10cm long each. In addition to attaching them to the shoulders of the Red Gundam, they can also be displayed in their ejected state using the dedicated base and auxiliary support.
- [Figure Size]: Approximately 15.5cm tall
- [Materials]: ABS, die-cast, PVC
[Set Contents]:
- Main figure
- Interchangeable hands (x3 each, left and right)
- Beam rifle
- Gundam shield
- Mounting parts for Gundam shield
- Replacement Gundam shield grip parts
- Beam saber blades (x2)
- Bits (x2)
- Hammer
- Joint parts for hammer
- Joint parts for hard points (x4)
- Auxiliary supports (x2)
- Base set
METAL ROBOT Damashii (SIDE MS) Red Gundam
- Regular price
- $250.00
- Sale price
- $250.00
- Regular price
-
$400.00
Couldn't load pickup availability
Policy
Disclaimer
All pre-order products are subject to distributor allocation and availability. Placing a pre-order does not guarantee fulfilment. Orders will generally be prioritised on a first-come, first-served basis, determined by the order confirmation timestamp, unless otherwise specified by the distributor.
In the event of insufficient allocation, unfulfilled orders will be carried forward to a subsequent shipment if a second wave is confirmed. If no further allocation is available, a full refund will be issued for the affected items.
All estimated release and arrival dates are subject to changes or delays by manufacturers, distributors, or suppliers.
Customer-initiated cancellations after the 48-hour confirmation period will result in the forfeiture of all amounts paid, as outlined in our Cancellation Policy.
Pre-Order Policy
Please note that all items within the same order must be available in stock before the order can be fulfilled or shipped.
We strongly recommend placing pre-order and in-stock items in separate orders to avoid unnecessary delays.
If an order contains both in-stock and pre-order items, the entire order will only be processed for shipping once the pre-order items have arrived and are available.
Similarly, for orders containing multiple pre-order items with different release dates, fulfilment will only take place once all pre-order items have arrived and are available in stock.
Partial shipments are not provided. Customers who wish to receive available items earlier are advised to place separate orders, as additional shipping charges may apply to any separately arranged deliveries.
Refund/Exchange Policy
All purchases made at The Avid Collectors are strictly non-refundable and non-exchangeable due to change of mind, incorrect purchases, or personal preferences.
Refunds or exchanges will not be accepted for products that have been opened, used, assembled, or tampered with, including but not limited to model kits, figures, trading card products, and Beyblades.
Minor imperfections to outer packaging, such as dents, creases, scratches, or manufacturer-related defects, are not grounds for refunds or exchanges if the product itself remains unaffected. Mint-condition packaging is not guaranteed, particularly for shipped orders.
In the event of incorrect, missing, or damaged items, customers must contact us promptly with their order details and supporting photographs. All requests will be reviewed on a case-by-case basis.
For pre-orders that cannot be fulfilled due to manufacturer cancellation, supplier unavailability, or insufficient allocation, a full refund will be issued for the affected items if no subsequent shipment is confirmed.
Approved refunds will be processed through the original payment method and may take approximately 10–14 business days to be reflected, depending on the payment provider or bank.
Cancellation Policy
Once an order has been confirmed for 48 hours, cancellations or amendments will no longer be accepted. Any customer-initiated cancellation of a confirmed pre-order after this period will result in the forfeiture of all amounts paid.
In the event of incorrect pricing, typographical errors, inaccurate product information, or other listing discrepancies, The Avid Collectors reserves the right to refuse, amend, or cancel affected orders. Customers will be notified accordingly, and a full refund will be issued for any affected items that cannot be fulfilled.
For pre-orders that cannot be fulfilled due to manufacturer cancellation, supplier unavailability, or insufficient distributor allocation, customers will be offered a subsequent shipment where confirmed or a full refund for the unfulfilled items.